Series 76 W6CW
W6CW - W8CW
KIT RICAMBI - SPARE KITS
| KIT Nr. | KIT 32 | KIT 41 | KIT 43 | KIT 44 | KIT 74 | KIT 188 | KIT 190 |
|---|---|---|---|---|---|---|---|
| Posizioni incluse Positions included | 54 | 50 | 3 — 4 5 — 6 — 7 (8) | 12 | 16 — 17 18 - 19 | 51 | 32 — 49 55 |
| Nr. Pcs . | 2 | 3 | 6 | 3 | 3 | 6 | 3 |
DISTINTA - SPARE PARTS
| POS | COD | DESCRIZIONE - DESCRIPTION KIT | NR |
|---|---|---|---|
| 1 | 99.4418.00 | Vite M12x90 UNI 5931 — Zinc. | 8 |
| 2 | 96.7195.00 | Rosetta ∅ 13x18x1.1 | 12 |
| 3 | 90.4059.00 | OR ∅ 32.93x3.53 (4131) — Spec. 43 | 6 |
| 4 | 36.2011.66 | Secle valvola 43 | 6 |
| 5 | 36.2010.76 | Valvola 43 | 6 |
| 6 | 94.7450.00 | Molla ∅ 16x27.5 43 | 6 |
| 7 | 36.2009.51 | Guida valvola 43 | 6 |
| 8 | 36.7065.01 | Gruppo valvola aspiraz./mand.43 | 6 |
| 9 | 90.4065.00 | OR ∅ 37.69x3.53 (4150) | 6 |
| 10 | 98.2420.00 | Tappo M42x1.5x23 | 6 |
| 11 | 76.1501.22 | Coperchio laterale carter | 1 |
| 12 | 90.1670.00 | Anello rad. ∅ 35x52x7 44 | 3 |
| 13 | 76.0100.22 | Carter pompA | 1 |
| 14 | 98.2270.00 | Tappo carico olio | 1 |
| 15 | 76.2119.84 | Guarnizione coperchio posteriore | 1 |
| 16 | 69.2195.66 | Vite fissaggio pistone 74 | 3 |
| 17 | 90.3841.00 | OR ∅ 17.13x2.62 (3068) 74 | 3 |
| 18 | 90.5107.00 | Anello antiest. ∅17.4x22x1.15 74 | 3 |
| 19 | 96.7555.00 | Rosetta ∅ 22x27x0.5 74 | 3 |
| 20 | 69.0400.09 | Pistone ∅ 36x60 | 3 |
| 21 | 76.0210.35 76.0211.35 | Albero — W8CW Albero — W6CW | 1 1 |
| 22 | 76.1600.22 | Coperchio posteriore carter | 1 |
| 23 | 76.0303.01 | Biella — Completa | 3 |
| 25 | 99.3720.00 | Vite M10x45 UNI 5931 — Zinc. | 6 |
| 26 | 90.3833.00 | OR ∅ 13.95x2.62 (3056) | 2 |
| 27 | 97.5968.00 | Spia livello olio | 1 |
| 28 | 98.2100.00 | Tappo G 3/8"x13 | 2 |
| POS | COD | DESCRIZIONE - DESCRIPTION KIT | NR |
|---|---|---|---|
| 29 | 99.1897.00 | Vite M6x25 UNI 5931 — Zinc. | 10 |
| 30 | 97.7400.00 | Spinotto ∅ 14x34.5 | 3 |
| 31 | 77.0500.54 | Guida pistone | 3 |
| 32 | 90.2818.00 | Anello RESTOP ∅ 36x48x6/3 190 | 3 |
| 33 | 96.7568.00 | Rosetta ∅ 22.3x51x0.5 | 3 |
| 34 | 99.3652.00 | Vite M10x20 UNI 5931 | 8 |
| 35 | 76.1500.22 | Coperchio laterale carter | 1 |
| 36 | 76.2200.78 | Spessore | 4 |
| 37 | 90.4141.00 | OR ∅ 85.32x3.53 (4337) | 2 |
| 38 | 91.8472.00 | Cuscinetto a rulli conici — Spec. | 2 |
| 39 | 76.2000.74 | Piedino | 2 |
| 40 | 90.9174.00 | Boccola ∅ 35x39x50 | 3 |
| 41 | 99.4266.00 | Vite M12x25 UNI 5739 — Zinc. | 4 |
| 42 | 98.2327.00 | Tappo G1" NPT | 1 |
| 43 | 98.2267.00 | Tappo G3/4" NPT | 1 |
| 46 | 76.1251.411 | Testata ∅ 36 | 1 |
| 47 | 90.3903.00 | OR ∅ 60x2.62 (3237) | 3 |
| 48 | 76.0801.70 | Anello di fondo ∅ 36 | 3 |
| 49 | 90.2820.00 | Anello ten. alt. ∅ 36x48x6/3.5 HP 190 | 3 |
| 50 | 69.1002.93 | Anello di testa ∅ 36 41 | 3 |
| 51 | 69.2170.70 | Anello intermedio ∅ 36 188 | 3 |
| 52 | 91.4978.00 | Linguetta 10x8x55 UNI 7435 | 1 |
| 53 | 90.0695.00 | Anello di arrest ∅ 35 UNI 7435 | 1 |
| 54 | 90.1672.00 | Anello rad. ∅ 35x52x8 32 | 1 |
| 55 | 90.2823.00 | Anello ten. alt. ∅ 36x48x7.5 LP 190 | 3 |
| 56 | 96.7570.00 | Rosetta ∅ 22.5x39.5x1 | 6 |
| 57 | 76.2117.70 | Distanziale | 3 |
